Friday, February 19, 2010

DR-15 Series 15W Class 2 Din Rail Power



MEAN WELL has announced the introduction of DR-15 series – 12~15W single output class II DIN rail switching power supply for the fast growing demand of DIN rail applications. With Class II of protection level (double insulated, no earth ground wire is required), DR-15 series provide users a safer operating environment since the whole plastic case is free from hazardous leakage current. Featuring 25mm of slim width, DR-15 can save the precious space in the cabinet. To compensate for wiring voltage drops, the output voltage can be adjusted from the front panel, and the colored LED indicator also give an immediate visual confirmation of the output status.


One unique feature of “no load power consumption < 0.5W” has also been incorporated into the DR-15 series. This has great advantage for more and more industrial/commercial applications that have energy-saving concern to differentiate themselves. Complying with the global safety and EMC requirements per UL60950-1, TUV EN60950-1, and EN55022/EN61204-3 Class B, these slim class II switchers are suitable to be installed in a power distribution box or a control cabinet and hence the major application fields are building automation, security, and household appliance control.


Universal AC input / Full range

Isolation class II

Protection: short circuit, overload (constant current limiting), over-voltage

Cooling by free air convection

Can be installed on DIN rail TS-35/7.5 or 15

LED indicator for power on

Operating temperature: -20~60℃

No load power consumption < 0.5W

100% full load burn-in test

Dimension (W*H*D): 25 * 93 * 56mm

Certificates: UL / CUL / TUV / CE / CB

3 years warranty

HRP(G)-150 Series 150W High Reliability Enclosed Type Series



To comply with the trend of energy saving, MEAN WELL introduced the new high performance product family of HRP series with high operating efficiency and low no load power consumption. As the first shot, HRP(G)-150 are 150W AC/DC miniature enclosed type power supplies with PFC function that fulfill the requirement of EN61000-3-2 for harmonic current. Comparing to our first generation of enclosed type PFC product SP-150 series, HRP(G)-150 reduce the size by 40.5% while boost the working efficiency by 5~13% in the mean time! Featuring up to 89% of high efficiency, it can provide 150W continuously up to 50℃ by only free air convection.


Standard functions of HRP-150 and HRPG-150 include 300VAC input surge immunity for 5 seconds, remote sense, LED indicator, heavy industry level of EMS immunity(EN61000-6-2), 5 years warranty, and protection for short-circuit, overload (constant current limiting), over voltage, and over temperature. To fulfill the emerging trend of eco-design concept, MEAN WELL specially offer the HRPG-150 models with additional remote ON/OFF control and 5V/0.3A standby output to achieve the goal of “no load power consumption <0.5W”. More and more end systems ask for this feature to comply with the requirement of ENERGY STAR and EuP norms and using our HRPG-150 should help designers achieve those regulations easily! Suitable applications of HRP(G)-150 are general electronic application, factory automation, moving sign, test and measurement equipment, and all usage that requires low no load power consumption.


Universal AC input 85~264V

Built-in active PFC function, PF>0.95

Protection: Short circuit / Overload / Over voltage / Over temperature

High efficiency up to 89%

Withstand 300VAC surge for 5 seconds

Cooling by free air convection

Built-in constant current limiting circuit

Built-in remote sense function

Built-in remote ON/OFF control and 5V/0.3A standby output (HRPG-150)

No load power consumption <0.5W (HRPG-150)

Dimension(L*W*H): 159mm*97mm*38mm

Certificate: UL / CUL / TUV / CE / CB

5 years warranty

RPS/D/T(G)-160 Series 160W Green Medical PCB Series



MEAN WELL launches another 5” * 3” low profile PCB type switching power supply – RPS(G)-160 , RPD(G)-160, and RPT(G)-160 series targeting at the medical and IT applications with the requirement of miniature size. The 5” * 3” PCB size has dominated the PCB-type power supply market for many years and MEAN WELL also offers several models from 45W, 65W, 75W, 125W, to 200W. The new series perfectly fill up the product gap aound140~160W that provide end users a more complete choice for all kinds of applications. RPS/D/T-160 with basic function can fulfill requirements of general medical or industrial applications while the green RPSG/RPDG/RPTG-160 with low no-load-power-consumption<0.75W can be implemented into all kinds of end systems with eco-design concept.


With built-in active PFC function, these units comply with requirement of harmonic current per EN61000-3-2. 100~110W can be provided by only free air convection while 145~160W full rated output can be extracted by providing them 20.5CFM of forced air. Featuring 300 μA of leakage current at 264VAC, they can be equipped into non-patient contact medical equipment and still comply with Class B per EMI regulations. Standard functions include PF/PG signal output, remote sense (single output 5~15V), and short circuit, overload, over voltage, and over temperature protections. General medical usage that requires low leakage current, general electronic application, and 1U low profile IT equipment are all suitable for applying this miniature product series.


RPSG/RPDG/RPTG-160 are specially design to comply with the emerging green concept in the market. With additional PS-ON control and 5V/0.8A standby output, these green models can achieve 0.75W of no-load-power-consumption that is suitable to be used in final systems regulated by Energy Star/EuP norms or any kind of energy-saving system design.



5” * 3” * 1.37” miniature size (127mm*76.2mm*34.6mm - L*W*H)

Free air convection for 100~110W, 145~160W with 20.5CFM forced air

Universal AC input / full range

Built-in active PFC function, PF>0.93

Low leakage current < 300μA

Protections: Short circuit / Overload / Over voltage / Over temperature

Power good / power fail signal output

Built-in remote sense function for RPS(G)-160-5/12/15

Compliance to UL60601-1 & TUV EN60601-1 medical safety standards

No load power consumption < 0.75W by PS-ON control (RPSG/RPDG/RPTG-160)

5V/0.8A standby output (RPSG/RPDG/RPTG-160)

100% full load burn-in test

Approval: UL / CUL / TUV / CE / CB

3 years warranty

SDR-480 Series 480W High Efficiency Slim Din Rail Series



MEAN WELL launches the second series of our new slim DIN rail product family ~ SDR-480 ~ for the growing demand of high performance DIN rail power supply in the market. Featuring 94%+ of extreme high efficiency, it can provide 480W continuously or 720W for 3 seconds (with 50% more free power!!) up to 60℃ by only free air convection. With built-in active PFC function, SDR-480 is a full input range switcher that fulfills the requirement of EN61000-3-2 for harmonic current. The slim design of 85.5mm in width helps save the precious space on the rail and also makes it 51.8% smaller in size compare to its predecessor model.


Other standard functions include DC OK relay contact, on panel LED indicator, and protection for short-circuit, overload, over voltage, and over temperature. To fulfill the requirements of marine and semi-conductor related usage, SDR-480 also complies with GL and SEMI F47 norms in addition to UL, CUL, TUV, and CE certificates. Suitable applications are factory automation, semi-conductor fabrication equipment, marine related installation, and electro-mechanical applications with medium to high power demand.


94% high efficiency

720W peak power ability for 3 seconds

Built-in active PFC function compliance to EN61000-3-2

Universal AC input 90~264V

Protection: Short circuit / Overload / Over voltage / Over temperature

Cooling by free air convection

DC OK relay contact

Can be installed on DIN rail TS-35/7.5 or 15

Dimension(W*H*D): 85.5mm*125.2mm*128.5mm

Certificate: UL / CUL / TUV / CE / CB / GL / SEMI F47

3 years warranty

GE12/18/24 Series Green Adaptor with Interchangeable AC Plug



In response to the high energy costs, all kinds of energy-saving regulations had been established by main countries in the world. In order to comply with the latest energy laws, MEAN WELL announced the introduction of new wall-mounted adaptor with interchangeable AC plug. The new GE12/18/24 series are 12W/18W/24W green adaptors in compliance to ENERGY STAR and EISA 2007 (Energy Independence and Security Act of 2007) required by USA government. With <0.3W of low no load power consumption and efficiency up to 81%, these three product series fulfill the trend of eco-design in the market nowadays.


GE12/18/24 are AC/DC single output wall-mounted adaptors with four kind of AC plugs (US, EU, Australian, UK) that can be changed flexibly for applications in different areas in the world. With 90~264Vac of universal input range and light weight design, these Class II power unit (without the F.G.) are especially suitable for business travelers or electronic products that may be used globally. Standard functions include power on LED indicator, short-circuit, overload, and over voltage protections. Complying with global safety certificates per TUV, UL, CUL, CE, FCC, CB, and C-Tick (CCC also for GE12) and passed LPS (limited power source), GE12/18/24 can safely power all kinds of consumer electronic products, communication products, and office/business equipment.


Interchangeable AC plug (US / EU / Australian / UK)

Universal AC input 90~264V

No load power consumption < 0.3W

ENERGY SATR compliant for 5~24V

Meet EISA 2007 (Energy Independence and Security Act)

Class II power (without earth pin)

Protection: Short circuit / Over voltage / Overload

LED indicator for power on

Dimension(L*W*H)70.7*40*38.8mm (GE12)
81*43*40.5mm (GE18/24)

Pass LPS

Approvals: UL / CUL / TUV / CCC / CE / FCC / C-Tick / CB (GS12)
UL / CUL / TUV / CE / FCC / C-Tick / CB (GS18/24)

2 years warranty

HRP(G)-600 Series 600W High Reliability Enclosed Type Series



To comply with the trend of energy saving, MEAN WELL introduced the new high performance PFC-G5 family with high operating efficiency and low no load power consumption. After the first shot of 150W HRP(G)-150 series, the new 600W models are also available now. HRP(G)-600 series are AC/DC miniature enclosed type power supplies with PFC function that fulfill the requirement of EN61000-3-2 for harmonic current. Comparing to our first generation of enclosed type PFC product SP-500 or PSP-600 series, HRP(G)-600 reduce the size by 23.4% while boost the working efficiency up to 5% in the mean time. Besides, the warranty is also increased to 5 years compare to 3 years originally.


Standard functions of HRP-600 and HRPG-600 include 300VAC input surge immunity for 5 seconds, remote sense, DC OK signal, LED indicator, heavy industry level of EMS immunity(EN61000-6-2), and protection for short-circuit, overload (constant current limiting), over voltage, and over temperature. Featuring up to 89% of high efficiency and 6.77W/in3 of power density, they can provide 600W continuously up to 50oC by built-in DC fan with fan speed control function. To fulfill the emerging trend of eco-design concept, MEAN WELL specially offer the HRPG-600 models with additional remote ON/OFF control and 5V/0.3A standby output to achieve the goal of “no load power consumption <0.75W”. More and more end systems ask for this feature to comply with the requirement of ENERGY STAR and EuP norms and using our HRPG-600 should help designers achieve those regulations easily! Suitable applications of HRP(G)-600 are general electronic application, factory automation, moving sign, test and measurement equipment, and all usage that requires low no load power consumption.


Universal AC input 85~264V

Built-in active PFC function, PF>0.95

Protection: Short circuit / overload / over voltage / over temperature

High efficiency up to 89%

Withstand 300VAC surge for 5 seconds

Cooling by built-in fan with fan speed control

Built-in constant current limiting circuit

Built-in remote sense function

DC OK signal

Built-in remote ON/OFF control and 5V/0.3A standby output (HRPG-600)

No load power consumption <0.75W (HRPG-600)

Dimension(L*W*H): 218mm*105mm*63.5mm

Certificate: UL / CUL / TUV / CE / CB

5 years warranty

NID30/60 Series 30W/60W Non-Isolated DC/DC Converter



The majority of DC/DC converter used in the industrial field belongs to “Input / Output isolated” design and MEAN WELL have already introduced enclosed type (15~1000W), PCB type (5~15W), module type (0.5~30W), and on-board type (5~15W) four big families for all kind of applications. In order to fulfill the demand of low cost and size-concerned market, MEAN WELL launched a new style of single output “Input / Output Non-isolated” DC-DC converter ~ NID30(30W) and NID60(60W) series. These regulated converters have standard SIP (Single-In-Line Package) pin configuration and are vertically mounted on the main system PCB, which is complementary to our existing NSD series with horizontally mounted characteristics.


Using Bulk topology with synchronized rectifying technology, NID30/60 possess up to 97% of high efficiency and 69.6W/in3 of extreme high power density, and hence can be cooled by only free air convection from -25~65℃. The miniature design (size of NID30: 50.8*13*10.7mm; size of NID60: 50.8*26*10.7mm) makes them suitable for size constraint applications where the layout space of system PCB is not enough. Input DC voltage range is 20(30)~53V which covers the popular DC BUS voltage of 24V and 48V, while the output voltage are 5V / 12V / 15V / 24V which is different from the low output voltage (<5VDC) often seen in the traditional POL (point of load) DC/DC converters. Other features include standard SIP pin configuration, low ripple noise, miniature size, low cost, and protection for short circuit, overload, and over voltage. Distributed power architecture, communication, industrial control are the suitable fields for these economical NID30 and NID60 series.


Non-isolated and regulated output design

2:1~3:1wide input range

±2% output voltage accuracy

Extremely high efficiency up to 97%

SIP(Single-In-Line Package) standard pin configuration

Built-in remote ON/OFF control

Cooling by free air convection

Protection Short circuit / Over voltage / Overload

Low cost, high reliability

Size(L*W*H) 50.8*13*10.7mm (NID30)
50.8*26*10.7mm (NID60)

2 years warranty

PLP-30 & 60 Series 30W & 60W PCB Type LED Power Supply



After introducing aluminum casing (CLG family) and fully enclosed plastic casing (PLN, ELN, LP family) LED power supplies, MEAN WELL launched another new product category, open frame type – PLP family, for the “low cost” and “built-in” installation of LED lighting related applications. PLP-30/60 series are 30W/60W switching power supplies with 90~264VAC universal input range. Built-in active PFC function, PF>0.9 & EN61000-3-2 Class C (harmonic current) can be achieved for output loading higher than 75% and hence can fulfill the general requirement for lighting fixtures.


Thanks to the simplified single stage PFC topology, the required high power factor can be achieved economically. Efficiency of PLP-30/60 series are as high as 89% and hence can operate at full load between -30 ~ +60℃ by only free air convection, the highest ambient temperature can even reach 70℃ which may often request by lighting systems. Through adjustment of built-in potential meter, output current level of the PSU can be fine tuned between 75~100% rated value to comply with the requirement of LED characteristics. Other standard functions include short circuit, over load, and over voltage protections. Typical applications for these new PCB type LED driver units include small scale moving signs, LED-based decorative lighting, and LED stage lighting equipment which has its own system casing.


4”x2” miniature PCB design

90~264V universal AC input range

Built-in active PFC function, PF>0.9 for 75% load or higher

Comply with EN61000-3-2 Class C for 75% load or higher

Protections: Short circuit, overload(constant current limiting), over voltage

High efficiency up to 89%

Cooling by free air convection

Adjustable output current level

Design refer to EN61347-2-13, EN55015, EN61547 per lighting regulations and UL60950-1 for ITE requirement

Low cost, high reliability

Dimension (LxWxH): 101.6x50.8x23mm (30W)101.6x50.8x28mm (60W)

2 years warranty

Suitable for LED lighting and moving sign applications

PSC-100 Series 100W PCB Type with Additional Charger Channel



MEAN WELL has launched another new economical PCB type switching power supply, PSC-100 series, for the fast growing security industry. Similar to our AD-55 and AD-155 series, beside the main output channel, it also has an additional charger output with smaller power rating to fulfill the special requirement of security, access control, alarm, or battery backup related applications. Compare to AD-55, PSC-100 has 10-times more charging capability that can significantly reduce the charging time for the system. With additional relay contact type alarm signals and 5”x3” miniature design, PSC-100 is very suitable for low cost applications that there’s system cabinet available to assemble the power supply unit.


Designed by high performance switching technology, the efficiency of PSC-100 has been improved by 12% over AD-55, so it can work under 70 ℃ of high ambient temperature by only free air convection. PSC-100 series possess full alarm signals in compliance to the demand of security system, including AC OK and battery low alarm. When the utility is off and the system goes into battery backup mode, the relay will change the state and a signal will be sent out to remind the users to do some early reaction. If the battery voltage goes down to 11V (for 12V battery bank) or 22V (for 24V battery bank), another relay alarm signal will be activated and notify the ”battery low” situation. The battery backup loop will be cut off when the battery voltage goes further down to 10.5V or 21V to prevent batteries from over-discharging. Protection for PSC-100 is complete, including short circuit, overload, and over voltage protection for output side and battery polarity protection (by fuse) and battery low cut-off for the battery side. Along with the global safety certificates per UL, CUL, TUV, CE, and CB, PSC-100 offers a good power choice for your new design of security system, access control system, emergency lighting system, alarm system, UPS system, and central monitoring system.


5”x3” miniature PCB design

90~264VAC universal input range

Relay contact type alarm signal for AC OK and battery low

Cooling by free air convection

Protection for battery side: polarity(by fuse), battery low cut off

Protection for output: short circuit, overload, over voltage

100% full load burn-in test

Approval: UL, CUL, TUV, CE, CB

Low cost, high reliability

Size (LxWxH): 127x76.2x31mm

2 years warranty

PLC Series 30~96W Class 2 LED Power Supply



MEAN WELL introduced the new PLC-30/60/100 LED power supply series for the emerging demand of LED lighting / decorative lighting applications. Modified from the existing PLN-30/60/100, the new plastic cases of PLC family are redesigned to change to terminal block style of I/O connection which provides more flexibility to the wiring job. The covers of PLC family also add on two small holes with rubber stoppers that users can adjust the output current or voltage of PLC-30/60/100 easily without removing the covers. Through the potential meters, output current level of PLC family can be adjusted between 75% and 100% (or 75~103%) of rated value while the output voltage can be adjusted between 85% and 100% (or 95~110%) of rated value. PLC-30/60/100 series are also limited power sources complying with UL 1310 class 2 that under any situation the output power will less than 100VA or 5A. This will significantly reduce the hazardous condition exposed to the technicians who execute the construction or maintenance of the LED lighting system.


Thanks to the leading edge ZCS/ZVS technology, the efficiency of PLC family are as high as 89% and hence can operate between -30 ~ +50℃ by only free air convection. Building in active PFC function, the PLC family complies with the limitation of harmonic current of lighting equipment per EN61000-3-2 Class C for 75% of output load or higher. Besides, the power factor (PF) value will higher than 0.9 also when the output loading is 75% or higher. Other characteristics include CC+CV mode output style and short circuit, overload, over voltage, and over temperature protections. PLC-30/60/100 also comply with global safety certificates per UL, CUL, TUV, and CE, including EN61347-2-13, UL1310 Class 2, and UL879 (UL Sign Components Manual/SAM List – PLC-100) for LED lighting / sign board related installations. Typical applications for these new Class 2 power units are moving signs and backlighting, LED-based decorative/architectural lighting, LED stage and theater lighting, and LED electronic displays.


Constant Current (CC) + Constant Voltage(CV) mode output style

UL1310 Class 2 power unit

Universal AC input / Full range

Built-in active PFC function, comply with EN61000-3-2 Class C (>75% load)

PF>0.9 for output load >75% of rated value

High efficiency up to 89%

Adjustable output voltage and current level

Cooling by free air convection

Fully enclosed plastic case with terminal block style of I/O

Protections: Short circuit, overload, over-voltage, over temperature

Approvals: UL/CUL/TUV/CE

Dimension (LxWxH): 160x 46x 30mm(PLC-30); 181.5x 62x 35mm(PLC-60); 200.5x 70.5x 35mm(PLC-100)

2 years warranty

PB-600 Series 600W Single Output Battery Charger



MEAN WELL introduced another new intelligent AC/DC battery charger PB-600 series (600W) for lead-acid battery charging applications. Featuring user selectable 2-stage / 8-stage charging characteristics, this intelligent charger controlled by microprocessor can quickly and efficiently feed your hungry batteries or using a more complete charging curve to store more energy into the battery banks. For the special new rechargeable batteries such as lithium-ion (LiFePO4, LiMnO2) batteries, charging curve of PB-600 also can be modified easily to fit in with their charging characteristics.



To effectively extend the lifetime of batteries and reduce the maintenance efforts, PB-600 also possesses a built-in temperature compensation circuit. Just connect the NTC sensor coming along with the charger unit to the body or ambient of the batteries, the output voltage of the charger will be adjusted accordingly based on the temperature. Featuring built-in active PFC function, PB-600 can comply with the harmonic requirement per EN61000-3-2 which has been requested by more and more countries in the world. Other standard function / feature includes IEC320-C14 ~ 3 pole AC inlet, power ON/OFF switch with light indicator, remote ON/OFF control, fan ON/OFF control, reverse polarity, short circuit, over-voltage, and over temperature protections. Suitable application includes electrical motorcycle, solar power system, security system, UPS system, electrical wheelchair, leisure vehicle and vessel applications that may use rechargeable batteries as the power source or back-up system.



Microprocessor controlled power management

2 / 8 stages charging curve selectable on output panel

Intelligent charger for lead acid batteries

Charging curve can be modified for all kinds of different batteries

Universal AC input / Full range

Built-in active PFC function, PF > 0.95

Protections: Reverse polarity / Short circuit / Over voltage / Over temperature

Built-in remote ON/OFF control

Built-in temperature compensation function

Cooling by built-in DC fan with fan speed control function

3 color LED loading indicator and relay contacts for status signals

3-poles AC inlet (IEC 320-C14)

Dimension (W*H*D): 230mm*158mm*67mm

Approvals: UL / CUL / TUV / CB / CE

3 years warranty

PSD-45 Series 45W PCB Type DC/DC Converter



MEAN WELL added a new 45W unit, PSD-45 series, into its DC/DC PCB type product line and enlarged the product offering of the low wattage D/D open frame switching power supply segment. Accompany with the existing PSD-05(5W) and PSD-15(15W) series, the PSD family now can fulfill most of the low power application for end systems. Because of the non-casing design, PSD-45 can maintain a lower cost and hence is suitable for economical installation inside the system enclosure. The 5”x3”(127mmx76mm) miniature design helps solve space problems and induces efficient space usage to reduce volume of the end system.


PSD-45 possesses up to 83% of operation efficiency and can be used under -10 ~ +60℃of ambient temperature by only free air convection. Featuring 2:1 wide DC input range, PSD-45 securely transfer a wide range of DC input voltage rating into a stable DC output. Other standard features include 1500VAC input/output isolation, potential meter for ±10% of Vo adjustment, CB/CE certificates and protections for short circuit, overload, over-voltage, and reverse polarity. Suitable applications for these small gadgets are industrial control, telecom, voltage-regulating, and vehicle/ship/back-up system that use batteries as the power source.


2:1 wide input range

1500VAC I/O isolation, output regulated design

Short circuit, overload, over voltage, reverse polarity protection

Output voltage adjustable by ±10% through on-board potential meter

Cooling by free air convection

Built-in EMI filter, low ripple noise

100% full load burn-in test

Low cost, high reliability

Dimension(WxHxD): 127mmx76mmx30mm

CB/CE approved

2 years warranty

TS-200 & 400 Series 200W & 400W DC/AC Power Inverter



MEAN WELL has launched two more high performance DC/AC power inverters - TS-200 & TS-400 series - after introducing TN/TS-1500, TS-1000, and TS-700 series that extends the product coverage into lower wattage field. Right now users can choose from 200W to 1500W among MEAN WELL’s complete inverter line for all kinds of system design. Using high-frequency circuit topology, these true sine wave inverters are light weight and possesses up to 88.5% of high efficiency. They can provide 200W(TS-200) or 400W(TS-400) continuously for all kinds of harsh load with low THD<3%. Peak load capability including 230W(TS-200) or 460W(TS-400) for 3 minutes, 300W(TS-200) or 600W(TS-400) for 10 seconds, and two times of surge power for 30 utility cycles.


TS-200/400 are controlled by microprocessor and the output AC voltage and frequency can be adjusted easily through their front panel. Protections for these units are complete: internal fuse, battery low alarm, battery low shutdown, battery polarity, battery over voltage protections for input side, while short circuit, inverter overload, over temperature protections, and GFCI (optional – type F) for output side. Other standard functions include remote ON/OFF control and LED indicator for status monitoring. The design of TS-200 and TS-400 series comply with global safety and EMC certificates and is suitable for powering all kinds of home appliances, power tools, and office & portable equipment in vehicles, yachts, mobile homes or places that the utility can’t be reached or the power quality is poor.


True sine wave output (THD < 3%)

High surge power up to 400W(TS-200) & 800W(TS-400)

Power ON/OFF switch & LED indicators for operation status

Protections: Input – Fuse, Bat. low alarm, Bat. low shutdown, Bat. polarity, Bat. over voltage Output – Short circuit, overload, over-temperature protection, GFCI (optional, F-type)

High efficiency up to 88.5%

Thermal controlled cooling fan for TS-400; Free air convection cooling for TS-200

Output AC voltage and frequency adjustable by setting button

Built-in remote ON/OFF control

100% full load burn-in test

Approval: E-mark, LVD(EN60950-1), CE, FCC

Dimension(LxWxH): 205x158x59mm(TS-200);205x158x67mm(TS-400)

2 years warranty

RSP-2400 Series 2400W High Reliability Enclosed Type Power Supply



MEAN WELL introduced the new “RSP-2400 series” – 2400W enclosed type switching power supply with power factor correction (PFC) function – to fill up the gap of parallel models between 1500W and 3000W. The new series phase-in allows MEAN WELL to offer users the complete high power product coverage along with various options by different wattages of 500W, 600W, 1000W, 1500W, 2400W and 3000W.


RSP-2400 is implemented the innovative low power loss circuit design which makes the efficiency up to 91.5%. Featuring 12.5W/ in3 of extreme high power density, RSP-2400 series can provide full output power up to 50℃. With the trim function, output voltage can be adjusted from 20% to 110% rated voltage by adding 1~5.5V of external control voltage which provide users great flexibility for their system design. RSP-2400 is also implemented advanced digital control technique that use microprocessor to deal with the power management job. It significantly increases the flexibility of PSU control and reduces the part count in the same time. To fulfill the requirements of high wattage applications from system users, RSP-2400 can triple the output wattage by the built-in parallel function.


Besides the standard functions of remote sense, remote ON/OFF control, 12V/0.1A auxiliary output, and alarm signal output (both relay and TTL signal), RSP-2400 series use “constant current limiting plus delay shutdown” as the overload protection which enable the unit to power capacitive/inductive load and still provide full protection for customers’ system in the same time. If you need a continuous constant current for charging purpose, just select through the jumper then the “shut-down” mechanism can be cancelled. In addition, all series comply with UL, CUL, TUV, CB and CE can greatly guarantee your safety. Applications include LCD panel burn-in system, IC testing equipment, instrumentation, telecom/datacom, laser-carving machine, factory automation, and battery charging etc….


High efficiency up to 91.5%; High power density 12.5W/ in3

AC input range 180~264V

Built-in active PFC function, PF>0.95

Output voltage can be trimmed between 20~110% rated value by adding 1~5.5V of external control voltage

Built-in parallel function (2+1)

Remote ON/OFF control and remote sense

Alarm signal output (TTL signal & relay contact)

12V/0.1A auxiliary output

Forced air cooling by built-in DC fan with fan speed control function

Protection: Short circuit, overload, over voltage, over temperature, fan alarm

Certificates: UL/CUL/TUV/CE/CB

Dimension(LxWxH): 278x 177.8x 63.5mm

3 years warranty

HRP(G)-300 Series 300W Miniature High Reliability Enclosed Type Series



To comply with the trend of energy saving and to fulfill the future demands of low energy-consumption products, MEAN WELL has successively introduced HRP-150/ HRPG-150 (150W) and HRP-600/ HRPG-600 (600W) series of miniature high performance enclosed type power supplies. And right now, the new 300W models, HRP-300 and HRPG-300 are available.


Featuring with high operating efficiency, miniaturization, energy-saving and 5 years warranty, HRP (G) family is the most high-end product in MEAN WELL’s enclosed type power supplies series. Built-in active PFC function to fulfill the requirement of EN61000-3-2 for harmonic current, HRP (G)-300 reduce the size by 30.7% and extend the warranty from 3 years to 5 years comparing to our first generation of enclosed type PFC product SP-320 series (320W).


HRP-300(basic models) and HRPG-300 (fully equipped models) are designed for fitting 1U low profile (41mm) rack chassis. Possessing up to 89% of high efficiency, it can be cooled by the built-in long life DC fan from -30℃ to +50℃ ambient temperature under full load condition, even up to +70℃ by derating the output load. In addition, HRP(G)-300 series equip with the function of 300VAC input surge immunity for 5 seconds, which can reduce the damages caused by the unstable AC main. To compensate for wiring voltage drops, remote sense function is built-in to fix up to 0.5V of voltage drop. Protection functions include short circuit, overload (constant current mode), over voltage and over temperature.


To fulfill the emerging trend of eco-design concept and the requirement of ENERGY STAR and EuP norm, MEAN WELL specially offer the HRPG-300 models with additional remote ON/OFF control and 5V/0.3A standby output to achieve the goal of “no load power consumption <0. 5W”. Using our HRPG-300 should help designers achieve those regulations easily. Both HRP-300 and HRPG-300 comply with global certificates per UL/ CUL/ TUV/CB/CE and can greatly guarantee your safety. Suitable applications of HRP-300 and HRPG-300 are general electronic application, factory automation, LED moving sign, test and measurement equipment, and all usage that requires low no load power consumption.


1U low profile (41mm)

Universal AC input 85~264VAC

Built-in active PFC function, PF>0.95

Withstand 300VAC surge for 5 seconds

High efficiency up to 89%

Protection: Short circuit, overload, over-voltage, over-temperature

Built-in constant current limiting circuit

Built-in remote sense function

DC OK signal

Cooling by built-in fan with fan speed control

Built-in remote ON/OFF control and 5V/0.3A standby output (HRPG-300)

No load power consumption <0.5W (HRPG-300)

Certificate: UL/CUL/TUV/CE/CB

High reliability

Dimension(LxWxH): 199x 105x 41mm

5 years warranty

GS220 Series 220W AC/DC Green Adaptor



After lunching GS12(12W, wall-mounted type), GS18(18W, desktop & wall-mounted type), GS25(25W, desktop & wall-mounted type), GS40/60/90 (40/60/90W, desktop type) , and AS-120P (120W, desktop type) seven series of green adaptors, MEAN WELL further expanded our AC/DC green adaptor line and introduced the GS220 series. The new generation of 220W adaptor comply with the latest ENERGY STAR regulation (version 2.0), EuP second step (Energy-Using Product Directive 2005/32/EC), and EISA 2007 (Energy Independence and Security Act of 2007) of USA. Possessing very low “no load power consumption."

Using the standard IEC320-C14 inlet as the input connector, GS220 series are 90~264VAC full range input single output desktop switchers with PFC function. With earth ground pin and enclosed by UL 94V-0 rated plastic case, these Class I units can effectively prevent users from electrical shock. Output voltage range from 12~48V also fulfill the requirements of various electronic equipments. In addition, using the up-to-date LLC topology and synchronize rectifier, GS220 series posses up to 94.5% of high efficiency which can be only cooled by free air convection from -10~+50℃under full load condition (@ 230VAC). Equipping with the features above, these green adaptors can be listed as one of the best solutions in the market if comparing with energy-saving concepts, high reliability and high efficiency. Furthermore, GS220 acquired global safety/EMC certificates per TUV, UL, CUL, CB, BSMI, CE, FCC, and CCC which greatly guarantee the safety and reliability for all different applications such as consumer electronics, POS system, and office/commercial equipment.


Universal AC input / Full range

Built-in active PFC function, PF>0.91

No load power consumption<0 .5w="" br="">
High efficiency up to 94.5%

ENERGY SATR compliant

Comply with ESIA 2007

3 pole AC inlet IEC320-C14

Class I power (with earth pin)

Built-in LED indicator for power on

Fully enclosed plastic case (UL 94V-0)

Protections : Short circuit / Overload / Over voltage / Over temperature

Approvals : TUV / UL / CUL / CB / BSMI / CCC / CE / FCC

DC output: 12 / 15 / 20 / 24 / 48V

Dimension(LxWxH): 210x85x46mm

2 years warranty

SP-240 Series 240W Enclosed Type Power Supply



After successfully selling for 14 years, S-240 series (240W) is going to be phased out on 2010/07/01(Begin produce by order with MOQ: 300pcs/lot since 2010/01/01). The successor “SP-240” series, single output enclosed type power supply with built-in active Power Factor Correction (PFC) function, is formally launched to market now. In order to easily make the replacement, this new series is designed to cover both features and dimensions of the old ones. For instance, we keep the same locations of bottom mounting holes and DC fan, but lower 15mm of the height, so that designers can easily use the original mechanism without any changes. In addition, SP-240 series can fill-up the gap of our enclosed type power supplies with PFC function between 200W and 320W, and also allows MEAN WELL to offer users the complete product coverage. Till now, we can offer various options of AC/DC single output product with PFC function to users by wattages of 75W, 100W, 150W, 200W, 240W, 320W, 480W, 500W and 750W.



SP-240 series possess built-in active PFC function which is superior to the passive PFC design of S-240. With full range input from 88 to 264VAC, this series has the same output voltages options (5V/7.5V/12V/15V/24V/30V/48V) as the old one. Featuring up to 89% of operating efficiency, SP-240 has higher efficiency by 1~4% than the corresponding models of its prior generation. SP-240 series also equip with a long life DC fan with fan ON/OFF control circuit that can be operated up to 70℃ambient temperature.

In addition, for the concern of cost advantage, this new power unit is designed with single side PCB instead of double side PCB of S-240. Except for extending its warranty from 2 years to 3 years, SP-240 series has standard functions of adjustable output voltage by internal potential meter, protection for short circuit, overload, over voltage and over temperature. All series comply with international safety standards per UL/CUL/TUV/CB/CE which ensure the worry free operation. Suitable applications include industrial automation, moving sign, electronic equipment, and instrumentation…etc.


Universal AC input 88~264VAC

Built-in active PFC, PF>0.95

Forced air cooling by built-in DC fan

Built-in fan ON/OFF control

Built-in potential meter enables output voltage adjustment

Protections: Short circuit / Overload / Over voltage / Over temperature

Built-in LED indicator

Certificates: UL / CUL / TUV / CB / CE

Low cost, high reliability

Dimension(LxWxH): 190mmx93mmx50mm

3 years warranty

LPLC-18 Series 18W Economical Constant Current LED Power Series



In response to the increasing energy price and the global warming problem, LED related application imbued with energy-saving concept is thriving nowadays. To accommodate the growing scope of LED lighting market, many industrial countries established LED related policies to support this prospective industry. After launching constant current (C.C.) mode models LPC-20 (20W), MEAN WELL introduced another 18W economical C.C. mode product ~ LPLC-18 and LPHC-18 series ~ to fulfill the increasing demands of LED lighting, decorative lighting, and general high dust/moisture applications. With non-PFC design, LPLC-18 (90~132VAC of input range) and LPHC-18 (180~264VAC of input range) could be the most cost- competitive LED power supplies of MEAN WELL’s existing C.C. mode models.



Filling with heat-conducted glue, LPLC-18 and LPHC-18 series can operate between -25 ~ +70℃ by only free air convection and has the internal shock absorber to withstand vibration. The IP67 structure, which is fully potted by glue and enclosed by plastic case with 94V-0 fire prevention level, can protect the electronic components against from dust and moisture that makes them can be used at harsh locations. Other standard functions / features include short circuit, over load, over voltage, and over temperature protections and wire-style input/output (18AWG*2) for flexible installation. Typical applications include LED electronic displays, LED wash-wall lighting, LED-based decorative/architectural lighting, LED stage and theater lighting.


Constant Current design (C.C. mode)

Input range 90~132VAC only for LPLC-18

Input range 180~264VAC only for LPHC-18

Plastic case and fully encapsulated, meet IP67

Cooling by free air convection

Protections: Short circuit, overload, over-voltage, over temperature

Design refer to CE / FCC / LPS

Low cost, high reliability

100% full load burn-in test

Dimension(LxWxH): 140x 30x 20mm

Suitable for LED-based decorative/architectural lighting, sign board

2 years warranty

SPV-1500 Series 1500W High Reliability Single Output Enclosed Type Power Supply



MEAN WELL introduced the new series “SPV-1500”─1500W enclosed type switching power supply equipped with parallel function and programmable output voltage function. By adding 1~6VDC external control, the output voltage of SPV-1500 can be trimmed from 20% to 120% of the rated voltage, which beyond the limits of 70~100% rated voltage of RSP-1500 series. This function greatly increases the flexibility to end system users when operate the equipments with different output voltage requirement. In addition, to fulfill the demands of high power applications, SPV-1500 series equip with parallel function which can increase the output wattages up to 4500W.


SPV-1500 is implemented the innovative ZVS technology which makes the efficiency up to 90%. Featuring 8.3W/ in3 high power density, this new series provides full output wattage even at 100VAC input that is suitable for full load usage in countries equipped with utility input of 100VAC or 115VAC (ex: Japan, USA and Taiwan) .


Besides the standard function of remote sense, remote ON/OFF control, 12V/0.1A auxiliary output, alarm signal output and programmable output voltage , SPV-1500 series use “constant current limiting ” as the overload protection which enable the unit to power capacitive/inductive load and still provide full protection for customers’ system in the same time. All series comply with certificates per UL, CUL, TUV, CB and CE and can greatly guarantee a safe operation. Applications include LCD panel burn-in system, IC testing equipment, telecom/datacom, laser-carving machine, factory automation, battery charging… etc.


Can adjust from 20~120% output voltage by external control 1~6VDC

High efficiency up to 90%; High power density 8.3W/ in3

90~264VAC full range input

Built-in active PFC function, PF>0.95

Built-in parallel function (2+1), total wattages up to 4500W

Built-in remote ON/OFF control and remote sense function

Alarm signal output

Built-in 12V/0.1A auxiliary output

Protection: Short circuit / Overload / Over voltage (constant current) / Over temperature

Certificates: UL / CUL / TUV / CB / CE

Dimension (LxWxH): 278x 127x 83.5mm

3 years warranty

SPV-1500 Series 1500W High Reliability Single Output Enclosed Type Power Supply



MEAN WELL introduced the new series “SPV-1500”─1500W enclosed type switching power supply equipped with parallel function and programmable output voltage function. By adding 1~6VDC external control, the output voltage of SPV-1500 can be trimmed from 20% to 120% of the rated voltage, which beyond the limits of 70~100% rated voltage of RSP-1500 series. This function greatly increases the flexibility to end system users when operate the equipments with different output voltage requirement. In addition, to fulfill the demands of high power applications, SPV-1500 series equip with parallel function which can increase the output wattages up to 4500W.


SPV-1500 is implemented the innovative ZVS technology which makes the efficiency up to 90%. Featuring 8.3W/ in3 high power density, this new series provides full output wattage even at 100VAC input that is suitable for full load usage in countries equipped with utility input of 100VAC or 115VAC (ex: Japan, USA and Taiwan) .


Besides the standard function of remote sense, remote ON/OFF control, 12V/0.1A auxiliary output, alarm signal output and programmable output voltage , SPV-1500 series use “constant current limiting ” as the overload protection which enable the unit to power capacitive/inductive load and still provide full protection for customers’ system in the same time. All series comply with certificates per UL, CUL, TUV, CB and CE and can greatly guarantee a safe operation. Applications include LCD panel burn-in system, IC testing equipment, telecom/datacom, laser-carving machine, factory automation, battery charging… etc.


Can adjust from 20~120% output voltage by external control 1~6VDC

High efficiency up to 90%; High power density 8.3W/ in3

90~264VAC full range input

Built-in active PFC function, PF>0.95

Built-in parallel function (2+1), total wattages up to 4500W

Built-in remote ON/OFF control and remote sense function

Alarm signal output

Built-in 12V/0.1A auxiliary output

Protection: Short circuit / Overload / Over voltage (constant current) / Over temperature

Certificates: UL / CUL / TUV / CB / CE

Dimension (LxWxH): 278x 127x 83.5mm

3 years warranty

SDR-120 Series 120W High Efficiency Slim Din Rail Power Supply



After launching SDR-240 (240W) and SDR-480 (480W) high performance single output slim DIN rail series, MEAN WELL continues to extend its product coverage to lower wattage applications. For the growing demand of low to medium wattage with high performance and space saving requirements, SDR-120 (120W) series, the AC/DC isolation Class I power units, are formally introduced to the market now.


With up-to-date circuit design, SDR-120 series possess up to 91% of high efficiency and can provide 120W continuously or 180W peak power for 3 seconds up to 55~60℃ by only free air convection. With built-in active PFC function, SDR-120 is a full range AC input (88~264VAC) switcher that fulfills the requirement of EN61000-3-2 for harmonic current. The slim design of 40mm in width helps save the precious space on the rail and also makes it 30.69% smaller in size compare to its predecessor model DR-120 (120W). Meanwhile, SDR-120 also has 5~9% higher efficiency than corresponding models of DR-120, which response to the trend of green power with energy saving concept.


Other standard functions include DC OK relay contact, on panel LED indicator, and protection for short-circuit, overload (constant current limiting, shut down if over 3 seconds), over voltage, and over temperature. To fulfill the requirements of marine and semi-conductor related usage, SDR-120 also complies with GL and SEMI F47 norms in addition to UL, CUL, TUV, and CE certificates. Suitable applications are factory automation, semi-conductor fabrication equipment, marine related installation, and electro-mechanical applications.


91% high efficiency

180W peak power for 3 seconds

Universal AC input 88~264V

Built-in active PFC function

Protection: Short circuit, overload (constant current limiting, shut down > 3 seconds) over voltage, over temperature

Cooling by free air convection

DC OK relay contact

LED indicator for power on

Installed on DIN rail TS-35/7.5 or 15

Certificate: UL / CUL / TUV / CE / CB / SEMI F47 / GL

Dimension(WxHxD): 40x 125.2x 113.5mm

3 years warranty

HRP-75 Series 75W Miniature High Reliability Enclosed Type



In response to the increase of energy cost, applications advertised with “Green Concept” become more and more popular. Hence, MEAN WELL introduced the new 75W miniature high reliability AC/DC enclosed type power supply ~ HRP-75 series, in order to comply with the trend of energy saving as well as low energy-consumption demands in the market. Along with the existing products - HRPG-150 (150W), HRPG-300 (300W) and HRPG-600 (600W), MEAN WELL currently can offer various wattage options from 75W to 600W within this product line of single output enclosed type power supply with PFC function and energy-saving concept. Featuring low no-load power consumption, high operating efficiency, and miniaturization, HRP-75 series reduce the size by 17.9% comparing to our first generation of PFC model SP-75 (75W) and increase the working efficiency by 9~11%. The ability of anti-vibration also be upgraded from 2G to 5G and the warranty is also extended from 3 years to 5 years.


HRP-75 series are designed for fitting 1U low profile (38mm) rack chassis. Possessing up to 89% of high efficiency, it can be cooled by free air convection from -30℃ to +70℃ ambient temperature. Built-in active PFC function, these new power units can fulfill the requirement of EN61000-3-2 for harmonic current and also withstand 300VAC input surge for 5 seconds, which can reduce the damage caused by the unstable AC main. Other standard functions include remote ON/OFF control, protection for short circuit, overload (constant current mode), over voltage and over temperature (optional). In addition, HRP-75 features with extreme low no-load power consumption (<0. 5W), which allows the designers easily conform to the requirements of ENERGY STAR and EuP norm for end systems. Suitable applications include factory automation, test and measurement equipment, electrical and mechanical industry, LED display and all usage that requires low no load power consumption.
\

No load power consumption <0.5W

1U low profile (38mm)

Withstand 300VAC surge for 5 seconds

Universal AC input 85~264 VAC

Built-in active PFC function, PF>0.9

High efficiency up to 89%

Cooling by free air convection

Built-in remote ON/OFF control

Protection: Short circuit/ Overload/ Over voltage/ Over temperature(optional)

Certificate: UL / CUL / TUV / CE / CB

Dimension (LxWxH): 129x 98x 38mm

5 years warranty

SPV-150/300 Series 150W/300W Enclosed Type with Programmable Output Voltage Function



After launching SPV-1500(1500W) series single output enclosed type power supply with programmable output voltage function, MEAN WELL extends its product coverage to the lower wattage of 150W and 300W─SPV-150 and SPV-300 series. By adding 1~5.5 VDC external control signal, the output voltage of both series can be trimmed from 20% to 110% of the rated value, which greatly increases the flexibility to end system users and adequately fulfills equipments which require switching between different output voltages.


SPV-150 and SPV-300 are high frequency design and possess efficiency up to 83% (SPV-150) and 86.5% (SPV-300) respectively. SPV-150 series can be cooled by only free air convection up to 40℃under full load condition while SPV-300 series are cooled by built-in long life DC fan with fan ON/OFF control which can be operated up to 50℃of ambient temperature. With full range input from 88 to 264VAC, these power units are built-in active PFC function and also comply with harmonic current requirement per EN61000-3-2.


Besides standard functions of remote ON/OFF control, protection for short circuit, over voltage, overload (constant current type), and over temperature, SPV-150/ 300 series also comply with certificates per UL, CUL, TUV, CB and CE that can greatly guarantee your safety. Applications include LCD panel burn-in system, IC testing equipment, factory automation, mechanical and electrical industry, or any applications that often need to adjust the output voltage.


Can adjust from 20~110% output voltage by external control 1~5.5VDC

Built-in active PFC function, PF>0.94

88~264VAC full range input

Protection: Short circuit / Overload / Over voltage(constant current) / Over temperature

Cooling by free air convection (SPV-150)

Forced air cooling by built-in DC long life fan (SPV-300)

Built-in potential meter for adjustment of -15%~+10% rated output voltage

Certificates: UL / CUL / TUV / CB / CE

3 years warranty

PLP-45 Series 45W PCB Type LED Power Supply



After introducing aluminum casing (CLG family) and fully enclosed plastic casing (PLN, PLC, ELN, LP family) LED power supplies, MEAN WELL launched another LED product category, AC/DC open frame type for the “low cost” and “built-in” installation of LED lighting related applications. The new PLP-45(45W) along with existing PLP-30(30W) and PLP-60(60W) series, MEAN WELL currently can offer LED system designers three different wattage options – 30W, 45W and 60W, which could fully satisfy the low power wattage requested by LED lighting designers. Featuring 90~264VAC full range input and built-in active PFC function, PLP-45 series can comply with EN61000-3-2 Class C (harmonic current) and PF>0.9 when output loading is higher than 75% to fulfill the general requirement of lighting fixtures.


Thanks to the simplified single stage PFC topology, the required high power factor can be achieved economically. Efficiency of PLP-45 series are as high as 89% and hence can operate at full load between -30 ~ +70℃ by only free air convection which may often request by lighting systems. Through adjustment of built-in potential meter, output current level of the PSU can be fine tuned between 75~100% rated value which increases the flexibility of system design. Other standard functions include short circuit, over load, and over voltage protections. Based on the case-less and 4”x2” miniature PCB design, PLP-45 series are very suitable for built-in installation of LED lighting fixtures. Typical applications include general indoor LED lighting, LED-based decorative lighting, and LED electrical display…etc.


4”x2” miniature PCB design

90~264V universal AC input range

Built-in active PFC function, comply with EN61000-3-2 Class C for 75% load or higher

PF>0.9 for 75% load or higher

High efficiency up to 89%

Cooling by free air convection

Protection: Short circuit / Overload / Over voltage

Suitable for built-in LED lighting fixtures

Low cost, high reliability

Comply with EN61347-2-13, EN55015, EN61547 per lighting regulations

2 years warranty

GC220 Series 218W AC/DC Battery Charger with Energy Saving Design



In response to the energy saving and environmental friendly requirements of battery charger, MEAN WELL leads the market and launched the new 218W AC/DC battery charger~GC220 series. Possessing very low “no load power consumption” (<1W) and up to 93% of high efficiency, the whole series are real energy-saving at both standby mode and active mode, which could be rated as the most “Green” battery charger in the market. Featuring 2-stage fast charging characteristics, these battery chargers can quickly and efficiently feed your hungry batteries. They are suitable for all kinds of batteries, such as lead-acid battery, Lithium-Mn battery(LiMnO2), Lithium-Fe battery(LiFePO4), and sealed lead-acid gel battery…etc.


Featuring 90~264VAC full range input, GC220 series possess 2-stage charging curve (constant current and constant voltage) and can monitor the battery capacity by detecting the battery voltage. The device can quickly charge the battery at constant current mode in a low battery capacity status. And then, when the battery bank become full, the charger can automatically turn into constant voltage mode with slight charging current to avoid lifetime reduction caused by over-charging.



Using the standard IEC320-C14 inlet as the input connector, GC220 series equip with earth ground pin and enclosed by UL 94V-0 rated plastic case. These Class I units can effectively prevent users from electrical shock and are especially suitable for charging electric scooter, electric bike, and electric wheelchair. Built-in active PFC function, GC220 series can comply with the harmonic requirement per EN61000-3-2 which has been requested by more and more countries in the world. Other standard function / feature includes 2 color LED indicator for charging status, short circuit, over-voltage, and over temperature protections. Furthermore, these chargers acquired global safety/EMC certificates per TUV, UL, CB, CE and FCC which greatly guarantee your safety for all different charging applications such as household appliance, security system, leisure vehicle and office / commercial equipment…etc.


2-stage charging characteristic

No load power consumption < 1W

High efficiency up to 93%

90~264VAC universal AC input/ Full range

Built-in active PFC function, PF>0.91

Cooling by free air convection within -10 to+60oC

Protections: Short circuit / Overload / Over voltage/ Over temperature

Fully enclosed plastic case (UL 94V-0)

2 color LED indicator for charging status

Approvals : TUV / UL / CB / CE / FCC

Dimension (LxWxH): 210x 85x 46mm

2 years warranty

SMA01 & SMU01 Series 1W Unregulated DC/DC Converter



In response to the market trend of cost effective and miniature size applications, MEAN WELL introduced two series of 1W unregulated single output DC/DC converters ~ SMA01 with dual-in-line package and SMU01with single-in-line package. The size of SMA01(0.5”x0.4”x0.3”) and SMU01(0.46”x0.29”x0.4”) are reduced by 50% compared to the current 1W product SUS01 (0.89”*0.39”*0.33”), which offer system designers the great flexibility of PCB layout for power stage design.


SMA01 and SMU01 series are designed to comply with the standard pin assignment in the market. Standard features include ±10% input range, 1500 VDC input/output isolation (optional for 3000 VDC), short circuit protection, low ripple noise, non-conductive plastic case and CE/FCC compliance…etc. Besides, fully encapsulated packaging can help them withstand the influence of dust and moisture comes from all kinds of harsh environment, therefore, these series can work at full load up to 85℃ of ambient temperature, which is 14 ℃ more than the common temperature of 71℃ in the market. Suitable applications include industrial control, telecom/datacom, and distributed power architecture related installations.


Operating temperature range of -40~85℃ at full load

1500 VDC Input/ Output isolation

Optional for 3000 VDC Input/ Output isolation

±10% of input voltage range

Built-in EMI filter

Single-in-line packaging (SMU01)/ Dual-in-line package (SMA01)

Non-conductive plastic case/ cooling by free air convection

Low cost, high reliability

Approvals : CE / FCC

Dimension (LxWxH, max.)
SMA01: 12.7x 10.16x 7.62mm (0.50”x 0.40x 0.30”)
SMU01: 11.6x 7.4x 10.14mm (0.46”x 0.29”x 0.40”)

2 years warranty

PLN-45 Series 45W Class 2 LED Power Supply



In response to the increasing demands of LED lighting and decorative lighting applications, MEAN WELL introduced another new AD/DC enclosed type LED power supply ~PLN-45 series~ 45W fully isolated plastic case with active PFC function designed for dustproof and waterproof purpose. Including this new series, right now our PLN family can fully satisfy the demands of all kinds of LED lighting fixtures by different wattage selections from 30W to 100W. These new power units comply with UL 1310 class 2 which represent the output power can less than 100VA or 5A under any situation. This feature significantly reduces the hazardous condition exposed to the technicians who execute the construction or maintenance of LED lighting system. In addition, the IP64 enclosure design can protect the electronic components against from dust and moisture that makes them can be used at all kind of locations.


Thanks to the simplified single stage PFC topology, the requirements for LED lighting/ decorative lighting industry, such as high power factor, cost effective as well as EN61000-3-2 harmonic class C compliance, can be achieved economically (> 75% loading). The working efficiency of PLN-45 series is up to 87.5%, hence, they can be operated between -30 ~ +50℃ by only free air convection, which can meet the LED drivers operating conditions in the world. Standard functions include 277VAC input voltage capability, short circuit, over load, over voltage, and over temperature protections. As for input/ output connection, 18AWG power cord is equipped to provide users a great flexibility for all kinds of system installation. To guarantee your safety, these power supplies comply with TUV/UL/CUL/CE certificates, includes major lighting standards such as UL 1310, UL879 SAM List, EN61347-1, EN61347-2-13.


AC input 90~295VAC/ Full range

Fully isolated plastic case with IP64 level

Built-in active PFC function/ EN61000-3-2 Class C compliance(>75% load)

PF>0.9 for 75% of load or higher

User adjustable output voltage and constant current level

Working efficiency up to 87.5%

Cooling by free air convection

Protections: Short circuit/ Overload/ Over voltage/ Over temperature

Low cost, high reliability

UL1310, EN61347-2-13, EN55015, EN61547 lighting standards approved

Dimension(LxWxH): 181x 61.5x 35mm

2 years warranty

HLG-240(H) Series 240W High Efficiency LED Power Supply



In response to the demand of LED lighting, architecture decoration, and outdoor lighting, following the successful launch of 18~150W LED power supply, MEAN WELL added two new series ~ HLG-240 and HLG-240H ~ to this high IP level product family in order to fulfill the higher wattage requirements in the market. Built-in active PFC function, HLG-240H series feature with 90~305VAC wide range AC input (90~264VAC for HLG-240). Not only meet the harmonic current limitation per EN61000-3-2 Class C, HLG-240(H) also fulfill PF>0.9 if loading over 65%. In addition, these two power units possess 4KV surge immunity (EN61000-4-5) ability which complies with the requirements of street lighting.


The major characteristic of these series is fully potted by heat-dissipating glue, so they can reach IP 65 or IP67 waterproof/ dustproof level. In the meantime, users can adjust DC output voltage range from 95 to 105% and current range from 50 to 100% by the following methods: A and C type by removing the rubber stopper on the cover, and B type by adjusting through the output cable. This flexibility can fulfill the demands of LED lighting system designers when they need some slight adjustment of output voltage and current. In order to fit in with the outdoor harsh environment, full-aluminum case and stainless screws are designed in these new power supplies.


With up-to date LLC and synchronize rectify technology, HLG-240(H) posses up to 94% of high efficiency, so it can be cooled by free air convection from -30℃ to +70℃ ambient temperature and meets the requirements of outdoor assembly. Beside standard functions of protections for short circuit, over voltage, overload, and over temperature, HLG-240(H) have four options (A/B/C/blank type) in different mechanisms and input/output design for your selection. I/O connection can be changed by output cable or terminal block, which allows users a flexible installation in various systems (please refer to the details as table below). HLG-240(H) series comply with global certificates per UL1012, EN61347-1, EN61347-2-13 of lighting regulations as well as UL60950, EN60950-1 of IT regulations, which can greatly guarantee your safety. These high efficiency power supplies are very suitable for LED street lighting, outdoor electric display, LED decorative lighting, indoor/outdoor LED lighting…etc. Besides, they are also good solutions for general applications at outdoor environment with high dust and moisture.


Full range input 90~264 VAC (HLG-240); Wide range input 90~305VAC (HLG-240H)

Aluminum case and potted by glue, comply with IP65/67 level

Output voltage/ current adjustable

Meet 4KV surge immunity level (EN61000-4-5)

Built-in active PFC function/ Comply with EN61000-3-2 harmonic Class C (>65% load)

Cooling by free air convection

Protections: Short circuit / Overload / Over voltage / Over temperature

Optional Model: (□=Blank or H;Blank: 90~264VAC, H: 90~305VAC)

Suitable for LED street lighting, electric display and indoor / outdoor LED lighting

Certificates: UL / CUL / TUV / CE

Dimension(LxWxH): 244.2x68x38.8mm

3 years warranty

PLC-45 Series 45W Class 2 LED Power Supply



After successful launching PLC-30(30W), PLC-60(60W) and PLC-100(96W) series, MEAN WELL added the new PLC-45 (45W) series to this LED power supply family for the emerging demand of LED lighting / decorative lighting applications. Until now, the PLC family designed with plastic cases plus terminal block style of I/O connection is able to offer user different wattage level from 30W to 96W.


Modified from the existing plastic case of PLN-45, the PLC-45 series are designed to have terminal block style of I/O connection instead of wires, which provides more flexibility to the wiring job. Meanwhile, the cover of PLC-45 have two small holes with rubber stoppers on top that users can adjust the output current or voltage easily without removing the covers. In addition, this series are limited power sources complying with UL 1310 class 2 that under any situation the output power will less than 100VA or 5A. This will significantly reduce the hazardous condition exposed to the technicians who execute the construction or maintenance of the LED lighting system.


Thanks to the leading edge single-stage PFC topology, the efficiency of PLC-45 are as high as 87.5% and hence can operate between -30 ~ +50℃ by only free air convection. Building in active PFC function, the PLC family complies with the limitation of harmonic current of lighting equipment per EN61000-3-2 Class C for 75% of output load or higher. Besides, the power factor (PF) value will higher than 0.9 also when the output loading is 75% or higher. Other characteristics include CC+CV mode output style and short circuit, overload, over voltage, and over temperature protections. PLC-45 series also comply with global safety certificates per TUV, UL, CUL and CE, including EN61347-1, EN61347-2-13, UL1310 Class 2 for LED lighting / sign board related installations. Typical applications for these new Class 2 power units are all kinds of indoor LED lighting, LED-based decorative lighting, LED indoor commercial lighting, LED stage and theater lighting, and LED electronic displays…etc.


Constant Current (CC) + Constant Voltage(CV) mode output style

UL1310 Class 2 power unit

Universal AC input / Full range

Built-in active PFC function, comply with EN61000-3-2 Class C (>75% load)

PF>0.9 for output load >75% of rated value

Adjustable output voltage and current level

Cooling by free air convection

Fully enclosed plastic case with terminal block style of I/O

Protections: Short circuit / Overload / Over voltage / Over temperature

Approvals: UL1310, EN61347-2-13, EN55015, EN61547 lighting related regulations

Dimension(LxWxH): 181.5x 62x 35mm

2 years warranty

CEN-100 Series 96W Economical LED Power Supply with Metal Enclosure



In response to the increasing energy price and the global warming problem, LED related application imbued with energy-saving concept is thriving nowadays. To accommodate the growing LED lighting market, many industrial countries established LED related policies to support this prospective industry. After launching CLG-100 series, MEAN WELL introduced another 96W cost effective metal case LED power supplies with active PFC function and IP66 level ~ CEN-100 series.


With special mechanical design, CEN-100 series can meet IP66 requirement perfectly and save the cost of expensive heat-conducting glue. Meanwhile, thanks to the simplified single stage PFC topology, the required high power factor for the lighting industry can be achieved economically. In addition, the upper cover of CEN-100 have two small holes with waterproof structure that users can adjust the output current (75~100%) or voltage (±10%) easily without removing the cover.


With up-to date high frequency switching technology, CEN-100 posses up to 91% of high efficiency, so it can be cooled by free air convection from -30℃ to +70℃ ambient temperature and meets the outdoor working requirements all over the world. In order to fit in with the outdoor harsh environment, full-aluminum case, stainless screws and waterproof cables are designed in these new power supplies. With 90~295VAC wide range AC input, CEN-100 series can fulfill the usage of 277VAC public power system in North America. Built-in active PFC function, they can meet the norms of harmonic current per EN61000-3-2 Class C, and also meet the requirement of PF>0.9 if loading over 60%. In addition, these power units equip with 4KV surge immunity (EN61000-4-5) which comply with requirements of street lighting applications. Other standard functions / features include constant voltage (C.V.) + constant current (C.C.) operation mode, short circuit, overload, over voltage, and over temperature protections. CEN-100 series also comply with certificates per TUV/UL/CUL/CE, which can greatly guarantee your safety. Typical applications include LED street lighting, LED decorative lighting, and general indoor/ outdoor LED-based lighting applications…etc.


Built-in constant voltage (C.V.) + constant current (C.C) mode

90~295VAC wide range AC input (meet 277VAC main input in North America)

Built-in active PFC function, PF>0.9 for 60% of load or higher

Comply with EN61000-3-2 harmonic Class C (>60% loading)

IP66 level

Output voltage / Current adjustable

91% high efficiency

Cooling by free air convection

Protections: Short circuit / Overload / Over voltage / Over temperature

Approvals: UL8750, EN61347-2-13, EN55015, EN61547 lighting related regulations

Dimension (LxWxH):193x 62.5x 40.5mm

3 years warranty

HRP-100 Series 100W Miniature High Reliability Enclosed Type



Among MEAN WELL’s new generation power supplies with miniature, high reliability, and low power consumption features, HRP-100 series, 100W AC/DC enclosed type power units with active PFC function have been launched right now. Accompany with the existing products – HRP-75 (75W), HRP-150/ HRPG-150 (150W), HRP-300/ HRPG-300 (300W) and HRP-600/ HRPG-600 (600W), MEAN WELL currently can offer various wattage selections from 75W to 600W for system designers who have low no load power consumption requirement under standby mode. HRP(G) family is the most high-end enclosed type power supplies within MEAN WELL’s product lines so far. Featuring high operating efficiency, miniaturization, and low no-load power consumption (<0.5W), HRP-100 reduce the size by 26.5% comparing to their first generation of PFC model SP-100 (100W) and increase the working efficiency by 4.5~8%. The warranty is also extended from 3 years to 5 years.


With up-to date circuit design, HRP-100 possess up to 90% of high efficiency that can be cooled by free air convection from -30℃ to +60℃ ambient temperature. Meanwhile, built-in active PFC function, these new power units allow AC input for 85~264Vac and fulfill the requirement of harmonic current per EN61000-3-2. In addition, they can also withstand 300VAC input surge for 5 seconds, which can prevent the damage caused by unstable AC mains. Other standard functions include remote ON/OFF control, protection for short circuit, overload (constant current mode), over voltage and over temperature (optional). Furthermore, HRP-100 features with extreme low no-load power consumption (<0. 5W) which allows designers easily conform to the requirements of ErP norm (Energy-related Product) of end systems. Suitable applications include factory automation, LED display, test and measurement equipment, electrical and mechanical industry, and all usage that requires low no load power consumption.



- No load power consumption <0.5W

- 1U low profile (38mm)

- Withstand 300VAC surge for 5 seconds

- Universal AC input 85~264 VAC

- Built-in active PFC function, PF>0.95

- Protection: Short circuit / Overload / Over voltage / Over temperature(optional)

- Cooling by free air convection

- Built-in remote ON/OFF control

- Built-in LED indicator

- Certificate: UL/CUL/TUV/CB/CE

- Dimension(LxWxH): 159x 97x 38mm

- 5 years warranty

WDR-120 Series 120W Slim Dim Rail Type with Wide Range Single Phase Input



In response to the rapid growing applications as well as the narrower width request of DIN rail power supplies, MEAN WELL introduced a new DIN rail family features with single phase wide input range ~ WDR family. WDR-120 series, 120W AC/DC slim DIN rail power supplies with extreme high efficiency, are firstly launched to the market now. This new series equip with 180 to 550Vac single phase wide input range. They can be used in general power system with single phase 230Vac input or can capture one phase from the 330~550Vac three-phase power system, which can greatly increase the flexibility of system deployment.



With up-to-date circuit design, WDR-120 series possess up to 92% of extreme high efficiency and can provide 120W continuously up to 60℃ by only free air convection, or operate under 70℃ ambient temperature by suitable power derating. The slim design of 40mm in width helps save the precious space on the rail and also makes it 30.58% smaller in size compare to its predecessor model DRH-120 (120W, 340~550Vac/ single phase). Meanwhile, with wider input range, WDR-120 also has 6% higher efficiency than corresponding models, which response to the trend of green power with energy saving concept. Other standard functions include DC OK relay contact, power on LED indicator, as well as protection for short-circuit, overload, over voltage, and over temperature. WDR-120 series comply with UL/CUL/CE safety standards and also meet the EMC requirements of heavy industrial immunity level (EN61000-6-2). Suitable applications include industrial control system, semi-conductor fabrication equipment, factory automation, electro-mechanical applications, and marine related installation…etc.




- Wide AC input range 180~550VAC(single phase)

- 92% extreme high efficiency

- EN61000-6-2 heavy industrial immunity level

- Protection: Short circuit / Overload (constant current limiting) / Over voltage / Over temperature
- Cooling by free air convection

- DC OK relay contact

- Front panel DC voltage adjustment(100~120%)

- LED indicator for power on

- Installed on DIN rail TS-35 / 7.5 or 15

- Certificate: UL508 / CE

- Dimension(WxHxD): 40x 125.2x 113.5mm

- 3 years warranty

Reg & Sparky LabCoat Giveaway!

We are giving away another free lab coat!

The contest is pretty simple, here's how it works: just include your company name and contact information in an email to sales@peaktopeakpower.com. Two weeks after our newsletter is sent out, we'll put all the names in a hat and draw a winner. Upon winning, you will be notified, your name will be listed in the next newsletter, and we'll ship the lab coat to you at absolutely no cost! Good luck!

New ELP-75 Series



With the increasing energy cost and concern of environmental protection, the requirement for energy-saving of energy related products have become much more serious. In response to the worldwide green trend and to meet the low power consumption requirement, MEAN WELL introduced a new series of power supply with green concept~ ELP-75 series, 75W AC/DC open frame type switching power supply. Featuring high efficiency, low no-load power consumption and cost effective, these PCB type PSU are designed to install directly into system chassis that don’t need any enclosure. Compared to the first generation of slim PCB type LPS-75 series, the working efficiency of ELP-75 increased by 5~11% and the no load power consumption is also below 0.5W which can be applied to many end systems required perfect energy-saving characteristics.


With up-to-date high efficiency circuit design, ELP-75 series features with 90~264VAC full range AC input and possesses up to 90% of high efficiency. Hence, it can be cooled by free air convection from -30℃ to +70℃ ambient temperature that required for operating in a closed system. Built-in active PFC function, these new power units can fulfill the requirement of EN61000-3-2 for harmonic current, which can reduce the interference caused by AC main to the end system. Perfect protection functions include short circuit, overload, and over voltage. In addition, ELP-75 features with extreme low no-load power consumption ( <0. 5W), which allows the designers easily conform to the requirements of ErP norm (Energy-related Products) for end systems. These units also comply with certificates per UL/CUL/TUV/CB/CE which can greatly guarantee your safety. Suitable applications include factory automation, electrical and mechanical industry, and all usage that requires low no load power consumption and high operating efficiency.


Slim PCB type design

No load power consumption <0.5W

High efficiency up to 90%

Universal AC input 90~264 VAC

Built-in active PFC function, PF>0.95

1U low profile

Cooling by free air convection

Protection: Short circuit / Overload / Over voltage

LED indicator for power on

Certificate: UL/CUL/TUV/CB/CE

Option case available (L shape bottom plate + upper cover)

Dimension(LxWxH): 175x 60x 27mm (PCB type); 195x 68.5x 33mm (enclosed type)

3 years warranty

Thursday, February 18, 2010

S-240 Phasing Out





After successfully selling for 14 years, S-240 series (240W) is going to be phased out on 2010/07/01(Begin produce by order with MOQ: 300pcs/lot since 2010/01/01). The successor “SP-240” series, single output enclosed type power supply with built-in active Power Factor Correction (PFC) function, is formally launched to market now. In order to easily make the replacement, this new series is designed to cover both features and dimensions of the old ones. For instance, we keep the same locations of bottom mounting holes and DC fan, but lower 15mm of the height, so that designers can easily use the original mechanism without any changes. In addition, SP-240 series can fill-up the gap of our enclosed type power supplies with PFC function between 200W and 320W, and also allows MEAN WELL to offer users the complete product coverage. Till now, we can offer various options of AC/DC single output product with PFC function to users by wattages of 75W, 100W, 150W, 200W, 240W, 320W, 480W, 500W and 750W.




SP-240 series possess built-in active PFC function which is superior to the passive PFC design of S-240. With full range input from 88 to 264VAC, this series has the same output voltages options (5V/7.5V/12V/15V/24V/30V/48V) as the old one. Featuring up to 89% of operating efficiency, SP-240 has higher efficiency by 1~4% than the corresponding models of its prior generation. SP-240 series also equip with a long life DC fan with fan ON/OFF control circuit that can be operated up to 70℃ambient temperature.



In addition, for the concern of cost advantage, this new power unit is designed with single side PCB instead of double side PCB of S-240. Except for extending its warranty from 2 years to 3 years, SP-240 series has standard functions of adjustable output voltage by internal potential meter, protection for short circuit, overload, over voltage and over temperature. All series comply with international safety standards per UL/CUL/TUV/CB/CE which ensure the worry free operation. Suitable applications include industrial automation, moving sign, electronic equipment, and instrumentation…etc

Monday, February 15, 2010

Cree and Arrow Electronics Sign Distribution Agreement to Serve Global Adoption of Silicon Carbide-Based Power Electronics

Cree, a market leader in LED lighting and silicon carbide (SiC) semiconductor components, announced a distribution agreement with Arrow Electronics, Inc. for Cree SiC power products.

The agreement gives Arrow's customers ready access to Cree's latest commercially-available SiC Junction Barrier Schottky (JBS) products. Among the Cree products available through Arrow will be the recently released Z-REC(TM) Series of 600-V Schottky diodes and the groundbreaking 1200-V Schottky diode line.

"Our customers are at the leading edge of green power designs," said Robert Behn, vice president of supplier marketing for Arrow Electronics. "Expanding our Cree product offerings from high-brightness and high-power LEDs to now include power products provides our customers even broader access to the products and support they need."

"Together, Cree and Arrow intend to accelerate the adoption of silicon carbide power semiconductors to create more efficient switching power supplies, alternative energy converters and motor drives," said Bob Pollock, Cree senior vice president, sales

Peak to Peak Power